PATTON ELECTRONICS, INC.
2030
| Card Type | Interface Converter |
| Chip Set | Patton |
| I/O Options | RJ-45 DCE port, 36-pin parallel port, power |
| Maximum Data Rate | 115.2Kbps |
| Data Bus | External |
| CONNECTIONS | |||
Function |
Label |
Function |
Label |
| 36-pin parallel port | CN1 |
Power | CN3 |
| DCE serial port (RJ-45) | CN2 |
||
| USER CONFIGURABLE SETTINGS | ||
Setting |
Label |
Position |
| » Hardware flow control enabled | SW1/1 |
Off |
| Software flow control enabled | SW1/1 |
On |
| » Reverse flow control enabled (nibble) | SW1/2 |
Off |
| Reverse flow control disabled (compatible) | SW1/2 |
On |
| » Factory configured - do not alter | SW1/5 |
Unidentifed |
| » Factory configured - do not alter | SW1/6 |
Unidentifed |
| » Factory configured - do not alter | SW1/7 |
Unidentifed |
| » Factory configured - do not alter | SW1/8 |
Unidentifed |
| DATA RATE | ||
Setting |
SW1/3 |
SW1/4 |
» 9600bps |
Off |
Off |
19.2Kbps |
Off |
On |
38.4Kbps |
On |
Off |
115.2Kbps |
On |
On |
| LED | ||
LED Codes |
Color |
Condition |
· · - · / · · - · / |
Red |
Computer is sending data |
· / · / · / |
Red |
Serial device is connected; computer is not sending data |
· · / · · / |
Red |
Serial and parallel device is connected; computer is not sending data |
· - · / · - · / |
Red |
Printer not ready; data held in buffer |
· · · · / · · · · |
Red |
Computer ignoring flow control; data lost |
| Note: LED blinks to show data activity. ( · = short blink, - = long blink, / = pause) | ||