MOTOROLA, INC.
VANGUARD 100
| Card Type | Modem/DSU/ISDN/NIC |
| Chip Set | Motorola |
| I/O Options | AC power connector, V.24 interface via 25-pin serial port, DTE/DCE V.11, V.35, V.36 interface via 25-pin serial port, daughtercard connector |
| Maximum Data Rate | 1.544Mbps (T1), 115.2Kbps (asynchronous), 56Kbps (DSU) |
| Data Bus | External |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| RJ-48 connector | CN1 |
AC power connector | CN4 |
| DTE/DCE port 2 | CN2 |
Daughtercard connector | CN5 |
| DTE/DCE port 3 | CN3 |
Power switch | SW1 |
USER CONFIGURABLE SETTINGS |
||
Setting |
Label |
Position |
| Pin 22 is output on port 2 | SW2/1 |
On |
| Pin 22 is input on port 2 | SW2/1 |
Off |
| Pin 25 is output on port 2 | SW2/2 |
On |
| Pin 25 is input on port 2 | SW2/2 |
Off |
| Pin 22 is output on port 3 | SW2/3 |
On |
| Pin 22 is input on port 3 | SW2/3 |
Off |
| Port 3 configured as PAD port | SW2/4 |
On |
| Normal operation enabled on port 3 | SW2/4 |
Off |
| Diagnostic test executed | SW2/5 |
On |
| Diagnostic test not executed | SW2/5 |
Off |
| Reset memory to default configuration | SW2/6 |
On |
| Do not reset memory to default configuration | SW2/6 |
Off |
DIM SETTINGS |
||||||||
Settings |
SW3/1 |
SW3/2 |
SW3/3 |
SW3/4 |
SW3/5 |
SW3/6 |
SW3/7 |
SW3/8 |
V.24 |
On |
On |
On |
On |
On |
Off |
Off |
Off |
V.11, V.35, V.36 |
Off |
Off |
Off |
Off |
Off |
On |
On |
On |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
PWR |
Green |
On |
Power is on |
PWR |
Green |
Off |
Power is off |
STS |
Green |
On |
Software running; Vanguard 100 is ready |
STS |
Green |
Off |
Software not running; an error has occurred |
STS |
Green |
Blinking (slow) |
Software is being loaded |
STS |
Green |
Blinking (fast) |
Flash memory does not contain valid software |
WTD |
Unidentified |
On |
Processor failed to reset timer in designated period; software or hardware error probable |
WTD |
Unidentified |
Off |
Processor operating normally |
TST |
Red |
On |
Diagnostic test(s) failed |
TST |
Red |
Off |
Device is not conducting a test |
TST |
Red |
Blinking |
Hardware is being tested |
Port 1 (IN) |
Unidentified |
On |
Port 1 is receiving zeros |
Port 1 (IN) |
Unidentified |
Off |
Port 1 is receiving ones |
Port 1 (OUT) |
Unidentified |
On |
Port 1 is transmitting zeros |
Port 1 (OUT) |
Unidentified |
Off |
Port 1 is transmitting ones |
Port 2 (IN) |
Unidentified |
On |
Port 2 is receiving zeros |
Port 2 (IN) |
Unidentified |
Off |
Port 2 is receiving ones |
Port 2 (OUT) |
Unidentified |
On |
Port 2 is transmitting zeros |
Port 2 (OUT) |
Unidentified |
Off |
Port 2 is transmitting ones |
Port 3 (IN) |
Unidentified |
On |
Port 3 is receiving zeros |
Port 3 (IN) |
Unidentified |
Off |
Port 3 is receiving ones |
Port 3 (OUT) |
Unidentified |
On |
Port 3 is transmitting zeros |
Port 3 (OUT) |
Unidentified |
Off |
Port 3 is transmitting ones |
MISCELLANEOUS TECHNICAL NOTES |
Device functionality is dependant upon type of daughtercard installed. Vanguard 100 is available in 2 or 3 serial port versions |
DIM SITE DAUGHTERCARD
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| DIM connector | CN7 |
DTE/DCE interface via 25-pin connector | CN9 |
| Header connector to mainboard | CN8 |
||
USER CONFIGURABLE SETTINGS |
||
Setting |
Label |
Position |
| Pin 22 on CN9 is set for input (test mode) | P22 |
Pins 1 & 2 closed |
| Pin 22 on CN9 is set for output (ring indicator) | P22 |
Pins 2 & 3 closed |
| Pin 25 on CN9 is set for input (test mode) | P25 |
Pins 1 & 2 closed |
| Pin 25 on CN9 is set for output (make busy) | P25 |
Pins 2 & 3 closed |
DIM SETTINGS |
||||||||
Settings |
SW4/1 |
SW4/2 |
SW4/3 |
SW4/4 |
SW4/5 |
SW4/6 |
SW4/7 |
SW4/8 |
V.24 |
On |
On |
On |
On |
On |
Off |
Off |
Off |
V.11, V.35, V.36 |
Off |
Off |
Off |
Off |
Off |
On |
On |
On |
| Wiring Type | RJ-48 DDS |
| Maximum Data Rate | 56Kbps |
DSU DAUGHTERCARD
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| Daughtercard connector | CN10 |
RJ-48 connector | CN11 |
| Wiring Type | RJ-45 ISDN U RJ-45 ISDN S/T |
ISDN DAUGHTERCARD
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| Daughtercard connector | CN12 |
RJ-45 connector | CN13 |