HAYES MICROCOMPUTER PRODUCTS, INC.
OPTIMA 96 + FAX96 (SWITCH VER.)
Modem Type | Data (synchronous/asynchronous)/Fax |
Maximum Data Rate | 9600bps |
Maximum Fax Rate | 9600bps |
Data Bus | External |
Fax Class | Class I & II |
Data Modulation Protocol | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.32 |
Fax Modulation Protocol | V.27ter, V.29 |
Error Correction/Compression | MNP2-5, V.42, V.42bis |
CONNECTIONS |
|||
Purpose |
Location |
Purpose |
Location |
Line in | CN1 |
RS-232 | CN4 |
Line out | CN2 |
Power switch | SW2 |
DC power | CN3 |
COMMAND SETS |
||
Mode |
SW1/1 |
|
» | Enabled |
On |
Disabled |
Off |
FACTORY CONFIGURED - DO NOT ALTER |
|
Switch |
Position |
SW1/2 |
N/A |
SW1/3 |
N/A |
SW1/4 |
N/A |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
HS |
Red |
On |
Modem is operating at 4800bps or faster |
HS |
Red |
Off |
Modem is operating at slower than 4800bps |
AA |
Red |
On |
Auto-answer enabled |
AA |
Red |
Off |
Auto-answer disabled |
AA |
Red |
Blinking |
Line is ringing |
CD |
Red |
On |
CD signal is high |
CD |
Red |
Off |
CD signal is low |
OH |
Red |
On |
Modem is off-hook |
OH |
Red |
Off |
Modem is on-hook |
RD |
Red |
On |
Modem is receiving data |
RD |
Red |
Off |
Modem is not receiving data |
SD |
Red |
On |
Modem is transmitting data |
SD |
Red |
Off |
Modem is not transmitting data |
TR |
Red |
On |
DTR signal is high |
TR |
Red |
Off |
DTR signal is low |
MR |
Red |
On |
Power is on |
MR |
Red |
Off |
Power is off |