TOSHIBA
SD-W1001
Device Type | Internal DVD-RAM |
Interface | SCSI-2 |
Spin Rate Read/Write | 16x (CD read only), 1x (DVD-RAM) |
Formats Supported | DVD-RAM (write & read), DVD-R (read), DVD-ROM, DVD Video, CD-ROM-XA, CD-I, CD-I Ready, CD-Plus, CD-I Bridge, CD-DA, CD-G, CD Extra, CD-R/RW |
View | Top |
CONNECTIONS |
|
Function |
Label |
Audio connector | CN1 |
USER CONFIGURABLE SETTINGS |
|||
Setting |
Label |
Position |
|
Parity check enabled | JP1/4 |
Open |
|
Parity check disabled | JP1/4 |
Closed |
|
» | Verify (written data on the media after the write operation) enabled | JP1/5 |
Open |
Verify disabled | JP1/5 |
Closed |
|
» | One LUN (Logical Unit Number) | JP1/6 |
Open |
Two LUN (Logical Unit Number) | JP1/6 |
Closed |
|
Test enabled (commands from the host computer are ignored) | JP1/7 |
Closed |
|
» | Test disabled | JP1/7 |
Open |
Termination enabled | JP1/8 |
Closed |
|
Termination disabled | JP1/8 |
Open |
DRIVE SELECT ID |
||||
Drive ID |
JP1/1 |
JP1/2 |
JP1/3 |
|
0 |
Open |
Open |
Open |
|
1 |
Closed |
Open |
Open |
|
2 |
Open |
Closed |
Open |
|
3 |
Closed |
Closed |
Open |
|
» | 4 |
Open |
Open |
Closed |
5 |
Closed |
Open |
Closed |
|
6 |
Open |
Closed |
Closed |
|
7 |
Closed |
Closed |
Closed |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
ROM |
Green |
On |
DVD-ROM, DVD-RAM or CD is loaded |
ROM |
Green |
Off |
DVD-ROM, DVD-RAM or CD is not loaded |
RAM |
Green |
On |
DVD-RAM disc is loaded |
RAM | Green | Off | DVD-RAM disc is not loaded |
BUSY |
Orange |
On |
Drive is in operation |
BUSY | Orange | Off | Drive is not in operation |