PHILIPS CONSUMER ELECTRONICS, CO.
PCA424DK
| Device Type | Internal DVD-ROM |
| Interface | IDE/ATAPI |
| Spin Rate (CD/DVD) | 24x, 4x |
| Formats Supported (CD) | CD-DA, CD-ROM(XA), CD-G, CD Text, CD-ROM, CD-I, Photo-CD, Video-CD, CD-Extra, CD-R, CD-RW, DVD-ROM (4.7, 8.5, 9.8, 17 GB), DVD-ROM book, DVD-Video |
| View | Top |
CONNECTIONS |
|
Function |
Label |
| Analog audio output | CN1 |
| USER CONFIGURABLE SETTINGS | |||
Setting |
Label |
Position |
|
| » | Factory configured – do not alter | JP2/1 |
Unidentified |
| » | Factory configured – do not alter | JP2/2 |
Unidentified |
| » | Factory configured – do not alter | JP2/3 |
Unidentified |
DRIVE CONFIGURATION |
||||
Setting |
JP1/1 |
JP1/2 |
JP1/3 |
|
Single drive only |
Open |
Closed |
Open |
|
| Drive is master in two drive system | Closed |
Open |
Open |
|
Drive is slave in two drive system |
Open |
Closed |
Open |
|
Master/slave determined by cable select |
Open |
Open |
Closed |
|
| Device Type | MPEG-2 decoder board |
| Interface | 32-bit PCI |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| 9 pin VGA in | CN1 |
Audio out | CN5 |
| 15 pin VGA out | CN2 |
Line out | CN6 |
| S-Video out | CN3 |
CD in | CN7 |
| S/P-DIF | CN4 |
||