YAMAHA CORPORATION
CDR400C
Device Type |
Internal CD-ROM |
Interface |
SCSI-2 |
Spin Rate (Read/Write) |
6x/4x |
Formats Supported Read |
CD-ROM, CD-ROM XA, CD-I, CD-DA, CD-Bridge, CD-Extra, Video CD, CD-R |
Formats Supported Write |
CD-ROM, CD-ROM XA, CD-I, CD-DA, CD-Bridge, CD-Extra, Video CD, CD-R |
View |
Top |
CONNECTIONS |
|
Function |
Label |
Audio Out |
CN1 |
USER CONFIGURATION SETTING |
|||
Setting |
Label |
Position |
|
» |
Parity check enabled |
JP1 |
Pins 7 & 8 Closed |
Parity check disabled |
JP1 |
Pins 7 & 8 Open |
|
Termination on |
JP1 |
Pins 9 & 10 Closed |
|
Termination off |
JP1 |
Pins 9 & 10 Open |
|
Block size on (for workstations) |
JP1 |
Pins 11 & 12 Closed |
|
» |
Block size off (for workstations) |
JP1 |
Pins 11 & 12 Open |
DRIVE SELECT ID |
|||
Drive ID |
JP1/1&2 |
JP1/3&4 |
JP1/5&6 |
0 |
Open |
Open |
Open |
1 |
Closed |
Open |
Open |
2 |
Open |
Closed |
Open |
3 |
Closed |
Closed |
Open |
4 |
Open |
Open |
Closed |
5 |
Closed |
Open |
Closed |
6 |
Open |
Closed |
Closed |
7 |
Closed |
Closed |
Closed |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Orange |
On |
Ready (no disc) |
LED1 |
Orange |
Blinking |
Inserting disc |
LED1 |
Green |
Blinking |
Ejecting disc |
LED1 |
Green |
On |
Ready (disc inserted) |
LED1 |
Green |
On |
Seeking |
LED1 |
Green |
On |
Preparing to write |
LED1 |
Green |
On |
Writing |
LED1 |
Green |
On |
Writing (test mode) |
LED1 |
Green |
On |
Playback |
LED1 |
Orange |
Blinking |
Error occurred |
LED2 |
Green |
Blinking |
Seeking |
LED2 |
Orange |
Blinking |
Preparing to write |
LED2 |
Orange |
On |
Writing |
LED2 |
Orange |
Blinking |
Writing (test mode) |
LED2 |
Green |
On |
Playback |