HI-VAL, INC.
CRW4261E
| Device Type | Internal CD-RW drive |
| Interface | ATAPI |
| Spin Rate (Read/Write) | 6x/4x |
| Formats Supported Read | CD-XA, CD-DA, CD-I, CD-ROM, CD-Bridge, CD-Extra, CD-Video, Multisession, CD-R, CD-RW |
| Formats Supported Write | CD-XA, CD-DA, CD-I, CD-ROM, CD-Bridge, CD-Extra, CD-Video, Multisession, CD-R, CD-RW |
| View | Top |
CONNECTIONS |
|||
Function |
Label | Function |
Label |
| Audio line out connector | CN1 | Headphone port |
CN2 |
USER CONFIGURABLE SETTINGS |
|||
Setting |
Label |
Position |
|
» |
Factory configured - do not alter | JP2 |
Unidentified |
ATAPI MASTER/SLAVE |
||||
Setting |
JP1/1 |
JP1/2 |
JP1/3 |
|
| » | Master in two drive system | Closed |
Open |
Open |
| Slave in two drive system | Open |
Closed |
Open |
|
| Master/slave determined by cable select | Open |
Open |
Closed |
|
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Orange |
On |
Power is on |
LED1 |
Orange |
Off |
Power is off |
LED1 |
Green |
On |
Unit contains a disc |
| LED1 | Orange/Green | Blinking | Disc is being inserted |
| LED1 | Orange | Blinking | Disc is being ejected |
LED2 |
Green |
On |
Data is being played back |
LED2 |
Green |
Blinking |
Data is being accessed |
LED2 |
Orange |
On |
Data is being recorded |
| LED2 | Orange | Blinking | Drive is prepairing to write or writing in test mode |