TANDBERG DATA
DLT 7000 (INTERNAL)
| Device Type | Internal Tape Drive |
| Interface | SCSI-2 Fast/Wide/Differential |
| Format | DLT |
| Sustained Transfer Rate | 5.0 MBPS/10.0 MBPS (Compressed) |
| Size | 5.25 in. full height |
| View | Top |
USER CONFIGURABLE SETTINGS |
|||
Setting |
Label |
Position |
|
| » | Remote SCSI ID enabled | JP1/Pins 9 & 10 |
Closed |
| Remote SCSI ID disabled | JP1/Pins 9 & 10 |
Open | |
| Loader Connector | JP2 |
Unidentified | |
| Termination Enabled | JP3/Pins 3 & 4 |
Closed | |
| Termination Disabled | JP3/Pins 3 & 4 |
Open | |
| Parity Check Enabled | JP4/Pins 1 & 2 |
Open | |
| Parity Check Disabled | JP4/Pins 1 & 2 |
Closed | |
DRIVE SELECT ID |
|||||
Drive ID |
JP1/Pins 1 & 2 |
JP1/Pins 3 & 4 |
JP1/Pins 5 & 6 |
JP1/Pins 7 & 8 |
|
0 |
Open |
Open |
Open | Open | |
1 |
Closed |
Open |
Open | Open | |
2 |
Open |
Closed |
Open | Open | |
3 |
Closed |
Closed |
Open | Open | |
| » | 4 |
Open |
Open |
Closed | Open |
5 |
Closed |
Open |
Closed | Open | |
6 |
Open |
Closed |
Closed | Open | |
7 |
Closed |
Closed |
Closed | Open | |
8 |
Open |
Open |
Open | Closed | |
9 |
Closed |
Open |
Open | Closed | |
10 |
Open |
Closed |
Open | Closed | |
11 |
Closed |
Closed |
Open | Closed | |
12 |
Open |
Open |
Closed | Closed | |
13 |
Closed |
Open |
Closed | Closed | |
14 |
Open |
Closed |
Closed | Closed | |
15 |
Closed |
Closed |
Closed | Closed | |
| Note: Pins 9 & 10 of JP1 are to be closed when selecting SCSI IDs. | |||||
MANUFACTURERS RECOMMENDED MEDIA |
||
Tape |
Capacity Without Compression |
Capacity With Compression |
DLT tape III |
10GB |
20GB |
DLT tape IIIxt |
15GB |
30GB |
DLT tape IV |
35GB |
70GB |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Yellow |
On |
Compression mode enabled (10.0, 15.0, and 35.0GB densities only). |
LED1 |
Yellow |
Off |
Compression mode disabled. |
LED2 |
Yellow |
On |
Density selected from front panel. |
LED2 |
Yellow |
Off |
Density to be selected by the host (automatic). |
LED4 |
Orange |
On |
Cartridge is write-protected. |
LED4 |
Orange |
Off |
Cartridge is write-enabled. |
LED5 |
Yellow |
Blinking |
Cartridge is loaded and tape is moving. |
LED5 |
Yellow |
On |
Cartridge is loaded and ready for use. |
LED5 |
Yellow |
Off |
Cartridge is not loading. |
LED6 |
Yellow |
On |
Drive head requires cleaning or tape is bad. |
LED6 |
Yellow |
Remains on after cleaning tape unloaded |
Cleaning tape attempted to clean drive head, tape expired, cleaning not performed. |
LED6 |
Yellow |
Turns on when data cartridge loaded after cleaning |
Problem data cartridge. Insert a different cartridge. |
LED6 |
Yellow |
Off |
Cleaning complete, or cleaning unnecessary. |
LED7 |
Green |
On |
Okay to operate cartridge insert/release handle. |
LED7 |
Green |
Off |
Do not operate cartridge insert/release handle |
LED7 |
Green |
Blinking |
Close and reinsert handle, wait for light to become steady. |
10.0/15.0 |
Yellow |
On |
Indicates tape is recorded in 10.0/15.0GB format. |
10.0/15.0 |
Yellow |
Blinking |
Indicates tape is recorded in another density selected for a write from BOT. |
20.0 |
Yellow |
On |
Indicates tape is recorded in 20.0GB format. |
20.0 |
Yellow |
Blinking |
Indicates tape is recorded in another density selected for a write from BOT. |
| 35.0 | Yellow |
On |
Indicates tape is recorded in 35.0GB |
| 35.0 | Yellow |
Blinking |
Indicates tape is recorded in another density selected for a write from BOT. |
| 40.0 | Yellow |
On |
Indicates tape is recorded in 40.0GB format. |
40.0 |
Yellow |
Blinking |
Indicates tape is recorded in another density selected for a write from BOT. |
| Note: All four right side or all seven left side indicators 'On' designates that the Power-on self-test (POST) is starting. All four right side or all seven left side indicators 'Blinking' designates that an error has occurred in the POST; clear the error by pressing the unload button, or turn drive power off and then on again. If error remains service is required. | |||