FUJITSU CORPORATION
M2483N
| Device Type | External Tape Drive |
| Interface | SCSI-2 |
| Format | IBM 3480/3490 |
| Sustained Transfer Rate | 3 MBPS |
| Size | 8.5 in. width x 5 in. height |
| View | Front |
USER CONFIGURABLE SETTINGS |
|||
Setting |
Label |
Position |
|
| TERMPWR supplied by MTC | TRM1 | Closed | |
| TERMPWR not supplied by MTC | TRM1 | Open | |
| Note: The
location of TRM1 is unidentified. Note: TRM1 is operational only if the system is configured as MTC. |
|||
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Unidentified |
On |
Prompts user to load the cartridge. |
LED1 |
Unidentified |
Off |
Cartridge is loaded |
LED2 |
Unidentified |
On |
Drive is selected on the SCSI bus |
LED2 |
Unidentified |
Off |
Drive is not selected on the SCSI bus |
LED3 |
Unidentified |
On |
The drive is reading/writing compressed data |
LED3 |
Unidentified |
Off |
The drive is reading/writing uncompressed data |
| Note: LED’s 4 through 10 each represent the different tape positions between BOT and EOT. When the tape is moving in the forward position, the LED’s light up sequentially starting from the BOT position. When the tape is moving in reverse, the LED’s light up sequentially in the reverse order. | |||