ECRIX CORPORATION
VXA-1 INTERNAL
| Device Type | Internal tape drive |
| Interface | SCSI |
| Format | VMA |
| Sustained Transfer Rate | 6144 MBPS |
| Size | 5.25 in. half height |
| View | Top |
USER CONFIGURABLE SETTINGS |
|||
Setting |
Label |
Position |
|
| » | Factory configured - do not alter | JP1 | Open |
| » | Termination power disabled | JP2/Pins 1 & 2 | Closed |
| Termination power enabled | JP2/Pins 1 & 2 | Open | |
| » | Factory configured - do not alter | JP2/Pins 3 & 4 | Open |
| Factory configured - do not alter | JP2/Pins 5 & 6 | Open | |
| » | Factory configured - do not alter | JP2/Pins 7 & 8 | Open |
DRIVE SELECT ID |
||||
Drive ID |
JP2/Pins 9 & 10 |
JP2/Pins 11 & 12 |
JP2/Pins 13 & 14 |
|
0 |
Open | Open | Open | |
1 |
Open | Open | Closed | |
2 |
Open | Closed | Open | |
| » | 3 |
Open | Closed | Closed |
4 |
Closed | Open | Open | |
5 |
Closed | Open | Closed | |
6 |
Closed | Closed | Open | |
7 |
Closed | Closed | Closed | |
MANUFACTURERS RECOMMENDED MEDIA |
||
Tape |
Capacity Without Compression |
Capacity With Compression |
| V6 | 12GB | 24GB |
| V17 | 33GB | 66GB |
DIAGNOSTIC LED(S) |
||||
LED1 |
LED2 | LED3 |
LED4 |
Condition |
| Blinking in sequential order | Power-on self test in progress. | |||
| Off | Off | Off |
On |
Tape not loaded in drive. |
| Off | Off | Off |
Blinking |
Data activity is occurring on SCSI interface. |
| Off | Blinking (green) |
Off | On (green) |
Tape is loading or unloading. |
| Off | On (green) |
Off | On (green) |
Tape loaded and drive is ready. |
| Off | Off | On (green) |
Blinking (green) |
Data is being read from tape. |
| Off | Off | On (yellow) |
Blinking (Green) |
Data is being written to tape. |
| Off | Off | Blinking (green) |
On (green) |
Tape is moving a space forward. |
| Blinking (green) |
Off | Off | On (green) |
Tape is moving a space in reverse or rewinding. |
| Blinking (green) |
Off | Blinking (green) |
On (green) |
Drive cleaning in progress. |
| Off | Blinking (yellow) |
Off | On (green) |
Drive cleaning is needed. |
| Off | Blinking (green & yellow) |
Off | On (green) |
Cleaning tape is used, insert new cleaning tape. |
| On (yellow) |
On (green) |
On (yellow) |
On (green) |
A recoverable error has occurred. |
| On (yellow) |
Off | On (yellow) |
On (green) |
A firmware error has occurred. |
| N/A | N/A | N/A | Blinking (red) |
Factory service is required. |