BENCHMARK TAPE SYSTEMS CORPORATION
DLT1 EXTERNAL
| Device Type | External Tape Drive |
| Interface | Ultra SCSI-2 |
| Format | DLT |
| Size | 5.25 in. full height |
| View | Top |
DRIVE SELECT ID |
| Note: SCSI ID is selected by activating SW1 until the desired number is displayed in the viewing window. |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
| LED1 | Unidentified |
On |
Write protection is enabled. |
| LED1 | Unidentified |
Off |
Write protection is not enabled. |
| LED2 | Unidentified |
Blinking |
Tape is spinning. |
| LED2 | Unidentified | On | Tape is loaded/drive is ready. |
| LED3 | Unidentified | Off | No tape loaded/drive not ready. |
| LED3 | Unidentified | On | Drive needs to be cleaned. |
| LED3 | Unidentified | Off | Cleaning is complete/no cleaning needed. |
| LED4 | Unidentified | On | POST is starting. |
| LED4 | Unidentified | Blinking | A POST error has occurred. |
MANUFACTURERS RECOMMENDED MEDIA |
||
Tape |
Capacity Without Compression |
Capacity With Compression |
| DLT IV | 40GB | 80GB |