LINKSYS
ETHER16
| Card Type | Network Interface Card |
| NIC Type | Ethernet |
| Maximum Onboard Memory | 16KB RAM |
| Boot ROM | Not available |
| Network Transfer Rate | 10Mbps |
| Topology | Linear Bus, Star |
| Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
| Data Bus | 16-bit ISA |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| RJ-45 UTP connector | CN1 |
RG-58A/U connector | CN2 |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Unidentified |
On |
PC On / Data is being transmitted/received in a thin coax cable |
LED1 |
Unidentified |
Off |
PC Off |
LED1 |
Unidentified |
Blinking |
Data is being transmitted/received in a UTP |
LED2 |
Unidentified |
On |
Network connection is good |
| LED2 | Unidentified |
Off | Network connection is broken |
| LED2 | Unidentified |
Blinking | Data is being received on twister pair only |
LED3 |
Unidentified |
Blinking |
Collision detected on network |
LED3 |
Unidentified |
Off |
Normal operation |
LED4 |
Unidentified |
Off |
Network connection is good |
LED4 |
Unidentified |
On |
Interruption detected on network |