CISCO SYSTEMS, INC.

ACCESSPRO  AP-RC
Card Type Network Interface Card
NIC Type Token Ring
Maximum Onboard Memory 18MB DRAM
Network Transfer Rate 4/16Mbps
Topology Ring
Wiring Type Unshielded twisted pair
Data Bus 16-bit ISA

CONNECTIONS

Function

Label

Function

Label

RJ-45 UTP connector (Token RIng)

CN1

RJ-45 port (asynchronous auxiliary)

CN3

DB-60 connector (60-pin proprietary serial WAN)

CN2

   


USER CONFIGURABLE SETTINGS

Function

Label

Position

» Factory configured - do not alter J8 Open
» Factory configured - do not alter J9 Pins 1 & 2 Closed
» Factory configured - do not alter J10 Open
» Factory configured - do not alter J11 Pins 1 & 2 Closed
» Factory configured - do not alter J12 Closed
» Factory configured - do not alter J13 Pins 2 & 3 Closed
» Factory configured - do not alter J14 Open
» Factory configured - do not alter J15 Open
» Factory configured - do not alter J17 Unidentified
» Factory configured - do not alter J21 Open
» Factory configured - do not alter J22 Open
» Factory configured - do not alter J24 Open
» Factory configured - do not alter J25 Closed
» Factory configured - do not alter J26 Closed


COMPORT ADDRESS SELECTION

Port

J18  J19
COM 1 Closed Closed
COM 2 Open Closed
COM 3 Closed Open
COM 4 Open Open


INTERRUPT SELECTION

IRQ

  J20 J23 
  4 Open Closed
» 3 Closed Open
  Disabled Open Open

Note: COMports 1 and 3 share IRQ 4. COMports 2 and 4 share IRQ 3. A malfunction will occur if two COMports use the same IRQ simultaneously


PRIMARY MEMORY CONFIGURATION (DRAM)

Size

Bank 0

2MB

2MB SIMM

6MB

6MB SIMM

18MB

18MB SIMM


SYSTEM CODE MEMORY CONFIGURATION

Size

Bank 1

4MB

4MB SIMM (80-pin)

8MB

8MB SIMM (80-pin)


DIAGNOSTIC LED(S)
Note: The configuration of LED1 & LED2 is unidentified