LANCAST
1130-03, 1130-06
| Card Type | Network Interface Card |
| NIC Type | Ethernet |
| Boot ROM | Not available |
| Network Transfer Rate | 100Mbps/200Mbps |
| Topology | Star, Peer-Peer |
| Wiring Type | Fiber optic cable |
| Data Bus | 32-bit PCI |
CONNECTIONS |
|
Function |
Label |
| Fiber optic connector (SC) | CN1 |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
ACT |
Green |
Blinking |
Data is being transmitted/received |
ACT |
Green |
Off |
Data is not being transmitted/received |
COL |
Green |
Blinking |
Data collisions are being detected |
COL |
Green |
Off |
Data collisions are not being detected |
FDX |
Green |
On |
Card is operating at full-duplex mode |
FDX |
Green |
Off |
Card is operating at half-duplex mode |
LINK |
Green |
On |
Network connection is good |
LINK |
Green |
Off |
Network connection is broken |
MISCELLANEOUS TECHNICAL NOTES |
Model 1130-03 uses a multimode fiber optic SC interface. Model 1130-06 uses a singlemode fiber optic SC interface. |