SYSKONNECT, INC.
SK-NET GE-LX DUAL LINK, SK-NET GE-SX DUAL LINK
| Card Type | Network Interface Card |
| NIC Type | Ethernet |
| Boot ROM | Not Available |
| Network Transfer Rate | 1000Mbps |
| Topology | Star |
| Wiring Type | Fiber |
| Data Bus | 64-bit PCI |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| Fiber connector | CN1 |
Fiber conector | CN2 |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Unidentified | On |
Card is ready. Drivers loaded. |
LED1 |
Unidentified | Off |
Card is not ready or drivers are not loaded |
LED2 |
Green | Off |
Network connection is broken on port A |
LED2 |
Green | On |
Network connection is good on port A |
LED2 |
Green | Blinking |
Port A is on stand by mode |
LED3 |
Unidentified | On (Blinking) | Data is being received on port A |
LED3 |
Unidentified | Off |
Data is not be received on port A |
LED4 |
Unidentified | On (Blinking) | Data is being transmitted on port A |
LED4 |
Unidentified | Off |
Data is not being transmitted on port A |
LED5 |
Green | Off |
Network connection is broken on port B |
LED5 |
Green | On |
Network connection is good on port B |
LED5 |
Green | Blinking |
Port B is on stand by mode |
LED6 |
Unidentified | On (Blinking) | Data is being received on port B |
LED6 |
Unidentified | Off | Data is not being received on port B |
| LED7 | Unidentified | On (Blinking) | Data is being transmitted on port B |
| LED7 | Unidentified | Off | Data is not being transmitted on port B |