DIAMOND FLOWER, INC.

PW65-S (REV. A+)

Device Type Mainboard
Processor Celeron/Pentium II/Pentium III
Processor Speed 233/266/300/333/350/366/400/433/450/500/550MHz
Chip Set Intel 810
Video Chip Set Unidentified
Audio Chip Set Unidentified
Maximum Onboard Memory 512MB (SDRAM supported)
Maximum Video Memory 1MB (shared from system memory)
Maximum Audio Memory Unidentified
Cache 0/128/256/512KB (located on the CPU)
BIOS Award
Dimensions 304mm x 170mm
I/O Options 32-bit PCI slots (5), floppy drive interface, game/MIDI port, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial port, serial interface, VGA port, riser slot, IR connector, USB ports (2), ATX power connector, line in, line out, microphone in, audio in - CD-ROMs (3), Wake on LAN connector


CONNECTIONS

Purpose

Location

Purpose

Location

ATX power connector

ATX

Power fan J6
PS/2 mouse port CN1 Serial interface J8
Game/MIDI port CN3 Audio in - CD-ROM (Sony) J10
Parallel port CN4 Audio in - CD-ROM (Mitsumi) J11
Line in CN5 Audio in - CD-ROM (Sony) J12
Microphone in CN6 IDE interface 1 J13
Line out CN7 IDE interface 2 J14
USB connector 1 CN8 IDE interface LED J15/Pins 1 & 2
USB connector 2 CN9 Green PC LED J15/Pins 4 & 5
VGA port CN10 Power switch J15/Pins 7 & 8
AMR riser slot CN11 Green PC connector J15/Pins 10 & 11
Serial port CN12 Reset switch J15/Pins 13 & 14
IR connector J1 Speaker J15/Pins 16-19
Floppy drive interface J2 Power LED & keylock J15/Pins 21-25
Chassis open connector J3 Wake on LAN connector J16
Chassis fan power J4 32-bit PCI slots

PC1 - PC5

CPU fan power J5 Thermal connector RT3


USER CONFIGURABLE SETTINGS

Function

Label

Position

»

CMOS memory normal operation JP2 Pins 1 & 2 closed
  CMOS memory clear JP2 Pins 2 & 3 closed
» Keyboard/mouse power on disabled JP5 Pins 1 & 2 closed

 

Keyboard/mouse power on enabled JP5 Pins 2 & 3 closed
» Factory configured - do not alter JP6 Pins 1 & 2 closed
» Audio CODEC enabled JP7 Pins 2 & 3 closed
  Audio CODEC disabled JP7 Pins 1 & 2 closed
» PC speaker enabled for beep message JP8 Pins 2 & 3 closed
  External speaker enabled for beep message JP8 PIns 1 & 2 closed


DIMM CONFIGURATION

Size

Bank 0

Bank 1

16MB

(1) 2M x 64

None

32MB

(1) 2M x 64

(1) 2M x 64

32MB

(1) 4M x 64

None

48MB

(1) 4M x 64

(1) 2M x 64

64MB

(1) 4M x 64

(1) 4M x 64

64MB

(1) 8M x 64

None

80MB

(1) 8M x 64

(1) 2M x 64

96MB

(1) 8M x 64

(1) 4M x 64

128MB

(1) 8M x 64

(1) 8M x 64

128MB

(1) 16M x 64

None

144MB

(1) 16M x 64

(1) 2M x 64

160MB

(1) 16M x 64

(1) 4M x 64

192MB

(1) 16M x 64

(1) 8M x 64

256MB

(1) 16M x 64

(1) 16M x 64

256MB

(1) 32M x 64

None

512MB

(1) 32M x 64

(1) 32M x 64

Note:   Board supports SDRAM memory.


CACHE CONFIGURATION

Note:  256KB/512KB cache is located on the Pentium II/Pentium III CPU.  128KB cache is located on the Celeron 300A and greater CPU.


BUS SPEED SELECTION

Setting JP9
» Auto-detect Pins 2 & 3 closed
  66MHz Pins 1 & 2 closed
  100MHz Open


DIAGNOSTIC LED(S)

LED Color Status Condition
LED1 Unidentified On System is in power-on, soft-off, or suspend mode
LED1 Unidentified Off System is off
LED2 Unidentifed On System is in power-on, or suspend mode
LED2 Unidentified Off System is in Soft-off state or Off