DIAMOND FLOWER, INC.

PW65-E (REV. A+)

Device Type Mainboard
Processor Celeron/Pentium II/Pentium III
Processor Speed 233/266/300/333/350/366/400/433/450/500/533/550MHz
Chip Set Intel 810-E
Video Chip Set Unidentified
Audio Chip Set Unidentified
Maximum Onboard Memory 512MB (SDRAM supported)
Maximum Video Memory 4MB
Maximum Audio Memory Unidentified
Cache 0/128/256/512KB (located on the CPU)
BIOS Award
Dimensions 304mm x 170mm
I/O Options 32-bit PCI slots (5), floppy drive interface, game/MIDI port, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial port, serial interface, VGA port, riser slot, IR connector, USB ports (2), ATX power connector, line in, line out, microphone in, audio in - CD-ROMs (3), Wake on LAN connector


CONNECTIONS

Purpose

Location

Purpose

Location

ATX power connector

ATX

Power fan J6
PS/2 mouse port CN1 Serial interface J8
Game/MIDI port CN3 Audio in - CD-ROM (Sony) J10
Parallel port CN4 Audio in - CD-ROM (Mitsumi) J11
Line in CN5 Audio in - CD-ROM (Sony) J12
Microphone in CN6 IDE interface 1 J13
Line out CN7 IDE interface 2 J14
USB connector 1 CN8 IDE interface LED J15/Pins 1 & 2
USB connector 2 CN9 Green PC LED J15/Pins 4 & 5
VGA port CN10 Power switch J15/Pins 7 & 8
AMR riser slot CN11 Green PC connector J15/Pins 10 & 11
Serial port CN12 Reset switch J15/Pins 13 & 14
IR connector J1 Speaker J15/Pins 16-19
Floppy drive interface J2 Power LED & keylock J15/Pins 21-25
Chassis open connector J3 Wake on LAN connector J16
Chassis fan power J4 32-bit PCI slots

PC1 - PC5

CPU fan power J5 Thermal connector RT3


USER CONFIGURABLE SETTINGS

Function

Label

Position

»

CMOS memory normal operation JP2 Pins 1 & 2 closed
  CMOS memory clear JP2 Pins 2 & 3 closed
» Keyboard/mouse power on disabled JP5 Pins 1 & 2 closed

 

Keyboard/mouse power on enabled JP5 Pins 2 & 3 closed
» Factory configured - do not alter JP6 Pins 1 & 2 closed
» Audio CODEC enabled JP7 Pins 2 & 3 closed
  Audio CODEC disabled JP7 Pins 1 & 2 closed
» PC speaker enabled for beep message JP8 Pins 2 & 3 closed
  External speaker enabled for beep message JP8 PIns 1 & 2 closed


DIMM CONFIGURATION

Size

Bank 0

Bank 1

16MB

(1) 2M x 64

None

32MB

(1) 2M x 64

(1) 2M x 64

32MB

(1) 4M x 64

None

48MB

(1) 4M x 64

(1) 2M x 64

64MB

(1) 4M x 64

(1) 4M x 64

64MB

(1) 8M x 64

None

80MB

(1) 8M x 64

(1) 2M x 64

96MB

(1) 8M x 64

(1) 4M x 64

128MB

(1) 8M x 64

(1) 8M x 64

128MB

(1) 16M x 64

None

144MB

(1) 16M x 64

(1) 2M x 64

160MB

(1) 16M x 64

(1) 4M x 64

192MB

(1) 16M x 64

(1) 8M x 64

256MB

(1) 16M x 64

(1) 16M x 64

256MB

(1) 32M x 64

None

512MB

(1) 32M x 64

(1) 32M x 64

Note:   Board supports SDRAM memory.


CACHE CONFIGURATION

Note:  256KB/512KB cache is located on the Pentium II/Pentium III CPU.  128KB cache is located on the Celeron 300A and greater CPU.


BUS SPEED SELECTION

Setting JP9
» Auto-detect Pins 2 & 3 closed
  66MHz Pins 1 & 2 closed
  100MHz Open


DIAGNOSTIC LED(S)

LED Color Status Condition
LED1 Unidentified On System is in power-on, soft-off, or suspend mode
LED1 Unidentified Off System is off
LED2 Unidentifed On System is in power-on, or suspend mode
LED2 Unidentified Off System is in Soft-off state or Off