ELITEGROUP COMPUTER SYSTEMS, INC.
P6ZXT-ME
Device Type | Mainboard |
Processor | Celeron/Pentium II/Pentium III |
Processor Speed | 233/266/300/333/350/366/400/433/450/466/500/550MHz |
Chip Set | Intel 440ZX |
Audio Chip Set | Elite |
Maximum Onboard Memory | 256MB (SDRAM supported) |
Maximum Audio Memory | Unidentified |
Cache | 0/128/256/512KB (located on the CPU) |
BIOS | Award |
Dimensions | 245mm x 220mm |
I/O Options | 32-bit PCI slots (3), floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB ports (2), ATX power connector, Wake-on LAN connector, Wake-on modem connector, auxiliary/audio in - CD-ROMs (2), game/MIDI port, line-out, line-in, microphone-in, SPDIF connector, SB-Link connector, fax/modem adapter card connector |
CONNECTIONS |
|||
Purpose |
Location |
Purpose |
Location |
AGP slot | AGP | SPDIF in/out connector | CN16 |
ATX power connector | ATX | Wake-on-modem connector | CN17 |
PS/2 mouse port | CN1 | Wake-on-LAN connector | CN18 |
USB port 1 | CN2 | Case fan power connector | CN19 |
USB port 2 | CN3 | IDE interface 1 | CN20 |
Parallel port | CN4 | IDE interface 2 | CN21 |
Serial port 1 | CN5 | Floppy drive interface | CN22 |
Serial port 2 | CN6 | SB-Link connector | CN23 |
Game/MIDI port | CN7 | Speaker | J1/Pins 1, 3, 5 & 7 |
Line out | CN8 | Power LED | J1/Pins 2, 4 & 6 |
Line in | CN9 | Keylock connector | J1/Pins 8 & 10 |
Microphone in | CN10 | Green PC LED connector | J1/Pins 13 & 14 |
CPU fan power | CN11 | IDE interface LED | J1/Pins 15 & 16 |
IR connector | CN12 | Reset switch | J1/Pins 17 & 18 |
Audio in - CD-ROM | CN13 | SMI connector | J1/Pins 19 & 20 |
Auxiliary audio in connector | CN14 | Power switch | J1/Pins 21 & 22 |
Fax/modem adapter card connector | CN15 | 32-bit PCI slots | PC1 - PC3 |
USER CONFIGURABLE SETTINGS |
|||
Function |
Label |
Position |
|
» |
CMOS memory normal operation | JP1 | Pins 2 & 3 closed |
CMOS memory clear | JP1 | Pins 1 & 2 closed | |
|
Keyboard power on enabled | JP2 | Pins 1 & 2 closed |
Keyboard power on disabled | JP2 | Pins 2 & 3 closed | |
Onboard audio enabled | JP3 | Pins 1 & 2 closed | |
Onboard audio disabled | JP3 | Pins 2 & 3 closed | |
Bus frequency-automatic selection | JP4 | Pins 1 & 2 closed | |
Bus frequency forced to 100 MHz | JP4 | Pins 2 & 3 closed |
DIMM CONFIGURATION |
||
Size |
Bank 0 |
Bank 1 |
8MB |
(1) 1M x 64 |
None |
16MB |
(1) 1M x 64 |
(1) 1M x 64 |
16MB |
(1) 2M x 64 |
None |
24MB |
(1) 2M x 64 |
(1) 1M x 64 |
32MB |
(1) 2M x 64 |
(1) 2M x 64 |
32MB |
(1) 4M x 64 |
None |
40MB |
(1) 4M x 64 |
(1) 1M x 64 |
48MB |
(1) 4M x 64 |
(1) 2M x 64 |
64MB |
(1) 4M x 64 |
(1) 4M x 64 |
64MB |
(1) 8M x 64 |
None |
72MB |
(1) 8M x 64 |
(1) 1M x 64 |
80MB |
(1) 8M x 64 |
(1) 2M x 64 |
96MB |
(1) 8M x 64 |
(1) 4M x 64 |
128MB |
(1) 8M x 64 |
(1) 8M x 64 |
128MB |
(1) 16M x 64 |
None |
136MB |
(1) 16M x 64 |
(1) 1M x 64 |
144MB |
(1) 16M x 64 |
(1) 2M x 64 |
160MB |
(1) 16M x 64 |
(1) 4M x 64 |
192MB |
(1) 16M x 64 |
(1) 8M x 64 |
256MB |
(1) 16M x 64 |
(1) 16M x 64 |
Note: Board supports SDRAM memory. If installed processor runs over a 100MHz system bus, then PC-100 modules are required |
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium II & Pentium III CPUs. 128KB cache is located on the Celeron 300A and greater CPUs. |