ELITEGROUP COMPUTER SYSTEMS, INC.
P6EX-A+
Device Type | Mainboard |
Processor | Celeron/Pentium II |
Processor Speed | 233/266/300/333MHz |
Chip Set | Intel 440EX |
Maximum Onboard Memory | 256MB (EDO & SDRAM supported) |
Cache | 0/128/256/512KB (located on the CPU) |
BIOS | Award |
Dimensions | 305mm x 188mm |
I/O Options | 32-bit PCI slots (4), AGP slot, floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB ports (2), ATX power connector, Wake-on LAN connector, Wake-on modem connector, SB-Link connector |
CONNECTIONS |
|||
Purpose |
Location |
Purpose |
Location |
AGP slot | AGP | IR connector | J15 |
ATX power connector | ATX | Power on LED | J16/Pins 1 - 3 |
PS/2 mouse port | CN1 | Green PC switch | J16/Pins 4 & 5 |
USB port 1 | CN2 | Green PC LED | J16/Pins 6 - 8 |
USB port 2 | CN3 | Reset switch | J16/Pins 9 & 10 |
Parallel port | CN4 | Keylock connector | J16/Pins 11 & 12 |
Serial port 2 | CN5 | Speaker | J16/Pins 13 - 16 |
Serial port 1 | CN6 | IDE interface LED | J16/Pins 17 & 18 |
IDE interface 1 | CN12 | Power switch | J16/Pins 19 & 20 |
IDE interface 2 | CN13 | Wake-on-LAN connector | J17 |
Floppy drive interface | CN14 | Wake-on-modem connector | J18 |
ATX power supply fan power | J1 | System fan power | J19 |
CPU fan power | J3 | 32-bit PCI slots | PC1 - PC4 |
SB-Link connector | J14 |
USER CONFIGURABLE SETTINGS |
|||
Function |
Label |
Position |
|
» | Keyboard power on enabled | JP1 | Pins 1 & 2 closed |
|
Keyboard power on disabled | JP1 | Pins 2 & 3 closed |
» | CMOS memory normal operation | JP3 | Pins 2 & 3 closed |
|
CMOS memory clear | JP3 | Pins 1 & 2 closed |
DIMM CONFIGURATION | |||
Size |
Bank 0 |
Bank 1 |
Bank 2 |
16MB |
(1) 2M x 64 |
None |
None |
32MB |
(1) 2M x 64 |
(1) 2M x 64 |
None |
48MB |
(1) 2M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
32MB |
(1) 4M x 64 |
None |
None |
48MB |
(1) 4M x 64 |
(1) 2M x 64 |
None |
64MB |
(1) 4M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
64MB |
(1) 4M x 64 |
(1) 4M x 64 |
None |
80MB |
(1) 4M x 64 |
(1) 4M x 64 |
(1) 2M x 64 |
96MB |
(1) 4M x 64 |
(1) 4M x 64 |
(1) 4M x 64 |
64MB |
(1) 8M x 64 |
None |
None |
80MB |
(1) 8M x 64 |
(1) 2M x 64 |
None |
96MB |
(1) 8M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
96MB |
(1) 8M x 64 |
(1) 4M x 64 |
None |
112MB |
(1) 8M x 64 |
(1) 4M x 64 |
(1) 2M x 64 |
128MB |
(1) 8M x 64 |
(1) 4M x 64 |
(1) 4M x 64 |
128MB |
(1) 8M x 64 |
(1) 8M x 64 |
None |
144MB |
(1) 8M x 64 |
(1) 8M x 64 |
(1) 2M x 64 |
160MB |
(1) 8M x 64 |
(1) 8M x 64 |
(1) 4M x 64 |
192MB |
(1) 8M x 64 |
(1) 8M x 64 |
(1) 8M x 64 |
128MB |
(1) 16M x 64 |
None |
None |
144MB |
(1) 16M x 64 |
(1) 2M x 64 |
None |
160MB |
(1) 16M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
160MB |
(1) 16M x 64 |
(1) 4M x 64 |
None |
176MB |
(1) 16M x 64 |
(1) 4M x 64 |
(1) 2M x 64 |
192MB |
(1) 16M x 64 |
(1) 4M x 64 |
(1) 4M x 64 |
192MB |
(1) 16M x 64 |
(1) 8M x 64 |
None |
208MB |
(1) 16M x 64 |
(1) 8M x 64 |
(1) 2M x 64 |
224MB |
(1) 16M x 64 |
(1) 8M x 64 |
(1) 4M x 64 |
256MB |
(1) 16M x 64 |
(1) 8M x 64 |
(1) 8M x 64 |
256MB |
(1) 16M x 64 |
(1) 16M x 64 |
None |
Note: Board
supports EDO & SDRAM memory. Note: If a double sided module is used in either Bank 0 or Bank 1, then Bank 3 can not be used. |
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium II CPUs. 128KB cache is located on the Celeron 300A and greater CPUs. |