ELITEGROUP COMPUTER SYSTEMS, INC.
P6BAT-A+
| Device Type | Mainboard |
| Processor | Celeron/Pentium II/Pentium III |
| Processor Speed | 350/366/400/433/450/466/500MHz |
| Chip Set | Intel/Elite BX |
| Audio Chip Set | Elite |
| Maximum Onboard Memory | 768MB (SDRAM supported) |
| Maximum Audio Memory | Unidentified |
| Cache | 0/128/256/512KB (located on the CPU) |
| BIOS | Award |
| Dimensions | 305mm x 220mm |
| I/O Options | 32-bit PCI slots (4), AGP slot, floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB ports (2), ATX power connector, Wake-On LAN connector, Wake-On modem connector, SB-Link connector, audio in - CD-ROMs (2), game/MIDI port, line out, line in, microphone in, SPDIF connector |
CONNECTIONS |
|||
Purpose |
Location |
Purpose |
Location |
| AGP slot | AGP | Serial port 2 | CN6 |
| ATX power connector | ATX | Game/MIDI port | CN7 |
| Power LED connector | C1 | Line out | CN8 |
| Green PC connector | C2 | Line in | CN9 |
| Green LED connector | C3 | Microphone in | CN10 |
| Keylock connector | C4 | SPDIF connector | CN11 |
| Reset switch | C5 | IR connector | CN12 |
| Speaker | C6 | Wake-On LAN connector | CN13 |
| IDE interface LED | C7 | Wake-On modem connector | CN14 |
| Power switch | C8 | SB-Link connector | CN15 |
| Audio in - CD-ROM | CD1 | System fan power | CN16 |
| Audio in - CD-ROM | CD2 | IDE interface 1 | CN17 |
| PS/2 mouse port | CN1 | IDE interface 2 | CN18 |
| USB port 1 | CN2 | Floppy drive interface | CN19 |
| USB port 2 | CN3 | CPU fan power | CN20 |
| Parallel port | CN4 | 32-bit PCI slots | PC1 - PC4 |
| Serial port 1 | CN5 | ||
USER CONFIGURABLE SETTINGS |
|||
Function |
Label |
Position |
|
» |
CMOS memory normal operation | JP1 | Pins 1 & 2 Closed |
| CMOS memory clear | JP1 | Pins 2 & 3 Closed | |
» |
Keyboard power on enabled | JP2 | Pins 2 & 3 Closed |
| Keyboard power on disabled | JP2 | Pins 1 & 2 Closed | |
| » | Onboard audio enabled | JP3 | Pins 1 & 2 Closed |
| Onboard audio disabled | JP3 | Pins 2 & 3 Closed | |
| » | SPDIF output signal is 0.5 volts | JP5 | Open |
| SPDIF output signal is 5 volts | JP5 | Closed | |
| » | Flash BIOS enabled | JP7 | Pins 1 & 2 Closed |
| Flash BIOS disabled | JP7 | Pins 2 & 3 Closed | |
BUS FREQUENCY SELECTION |
||
Setting |
JP4 |
|
| » | Normal bus frequency | Pins 1 & 2 Closed |
| Force 100MHz | Pins 2 & 3 Closed | |
Note: System will automatically select 66MHz or 100MHz based on the processor when normal bus frequency settings is used. System will use 100MHz regardless of the processor when force 100MHz setting is used. |
||
| DIMM CONFIGURATION | |||
Size |
Bank 0 |
Bank 1 |
Bank 2 |
8MB |
(1) 1M x 64 |
None |
None |
16MB |
(1) 1M x 64 |
(1) 1M x 64 |
None |
16MB |
(1) 2M x 64 |
None |
None |
24MB |
(1) 1M x 64 |
(1) 1M x 64 |
(1) 1M x 64 |
32MB |
(1) 2M x 64 |
(1) 2M x 64 |
None |
32MB |
(1) 4M x 64 |
None |
None |
32MB |
(1) 2M x 64 |
(1) 1M x 64 |
(1) 1M x 64 |
48MB |
(1) 2M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
48MB |
(1) 4M x 64 |
(1) 1M x 64 |
(1) 1M x 64 |
64MB |
(1) 4M x 64 |
(1) 4M x 64 |
None |
64MB |
(1) 8M x 64 |
None |
None |
64MB |
(1) 4M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
80MB |
(1) 8M x 64 |
(1) 1M x 64 |
(1) 1M x 64 |
96MB |
(1) 4M x 64 |
(1) 4M x 64 |
(1) 4M x 64 |
96MB |
(1) 8M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
128MB |
(1) 8M x 64 |
(1) 8M x 64 |
None |
128MB |
(1) 16M x 64 |
None |
None |
128MB |
(1) 8M x 64 |
(1) 4M x 64 |
(1) 4M x 64 |
144MB |
(1) 16M x 64 |
(1) 1M x 64 |
(1) 1M x 64 |
160MB |
(1) 16M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
192MB |
(1) 8M x 64 |
(1) 8M x 64 |
(1) 8M x 64 |
192MB |
(1) 16M x 64 |
(1) 4M x 64 |
(1) 4M x 64 |
256MB |
(1) 16M x 64 |
(1) 16M x 64 |
None |
256MB |
(1) 32M x 64 |
None |
None |
256MB |
(1) 16M x 64 |
(1) 8M x 64 |
(1) 8M x 64 |
272MB |
(1) 32M x 64 |
(1) 1M x 64 |
(1) 1M x 64 |
288MB |
(1) 32M x 64 |
(1) 2M x 64 |
(1) 2M x 64 |
320MB |
(1) 32M x 64 |
(1) 4M x 64 |
(1) 4M x 64 |
384MB |
(1) 16M x 64 |
(1) 16M x 64 |
(1) 16M x 64 |
384MB |
(1) 32M x 64 |
(1) 8M x 64 |
(1) 8M x 64 |
512MB |
(1) 32M x 64 |
(1) 32M x 64 |
None |
512MB |
(1) 32M x 64 |
(1) 16M x 64 |
(1) 16M x 64 |
768MB |
(1) 32M x 64 |
(1) 32M x 64 |
(1) 32M x 64 |
| Note: SDRAM memory is supported. PC-100 modules must be used if processor operates at a 100MHz bus (Pentium II, III cartridge). PC-100 modules or 66MHz modules may be installed if the PPGA Celeron processor is used (system will run memory at 66MHz). | |||
CACHE CONFIGURATION |
| Note: 256KB/512KB cache is located on the Pentium II, III CPU. 128KB cache is located on the Celeron 300A and greater CPUs. |
MISCELLANEOUS TECHNICAL NOTE |
| This mainboard is not a dual processor board. Only one CPU socket can be used at a time. |