ASUS COMPUTER INTERNATIONAL
P2E-VM (REV. 1.02)
Device Type | Mainboard |
Processor | Pentium II/Celeron |
Processor Speed | 233/266/300/333MHz |
Chip Set | Intel 440LX |
Video Chip Set | ATI |
Maximum Onboard Memory | 256MB (SDRAM supported) |
Maximum Video Memory | 8MB |
Audio Chip Set | Unidentified |
Cache | 0/128/512KB (located on the CPU) |
BIOS | Unidentified |
Dimensions | 305mm x 244mm |
I/O Options | 32-bit PCI slots (3), floppy drive interface, game/MIDI port, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VGA port, IR connector, USB connectors (2), ATX power connector, line in, line out, microphone in, audio in - CD-ROMs (2), wake on LAN connector |
CONNECTIONS |
|||
Purpose | Location |
Purpose | Location |
ATX power connector | ATX |
TV out connector | C14 |
Turbo LED | C1/pins 2 & 3 |
ATX fan power | C15 |
Green PC connector | C1/pins 4 & 5 |
Game/MIDI port | CN1 |
Soft off power supply | C1/pins 6 & 7 |
Microphone in | CN2 |
Reset switch | C1/pins 9 & 10 |
Line in | CN3 |
Power LED & keylock | C1/pins 11 - 15 |
Line out | CN4 |
Speaker | C1/pins 17 - 20 |
VGA port | CN5 |
V panel connector | C2 |
Serial port 1 | CN6 |
IDE interface LED | C3 |
Parallel port | CN7 |
IR connector | C4 |
USB connector 1 | CN8 |
SMB connector | C5 |
USB connector 2 | CN9 |
Chassis fan power | C6 |
PS/2 mouse port | CN10 |
CPU fan power | C7 |
Floppy drive interface | CN11 |
Power fan power | C8 |
IDE interface 2 | CN12 |
Wake on LAN connector | C9 |
IDE interface 1 | CN13 |
Digital audio interface | C10 |
Serial port 2 | CN14 |
Auxiliary in | C11 |
AMC connector | CN15 |
Audio in - CD-ROM | C12 |
32-bit PCI slots | PC1 - PC3 |
Audio in - CD-ROM | C13 |
USER CONFIGURABLE SETTINGS |
|||
Function |
Label |
Position |
|
» |
VGA IRQ disabled | INT |
Pins 1 & 2 closed |
VGA IRQ enabled | INT |
Pins 2 & 3 closed |
|
» |
Keyboard power up disabled | KBP |
Pins 1 & 2 closed |
Keyboard power up enabled | KBP |
Pins 2 & 3 closed |
|
» |
CMOS memory normal operation | RTC |
Open |
CMOS memory clear | RTC |
Closed |
|
» |
Factory configured - do not alter | RTCP |
Unidentified |
» |
On board video enabled | VGA |
Pins 1 & 2 closed |
On board video disabled | VGA |
Pins 2 & 3 closed |
DIMM CONFIGURATION |
||
Size |
Bank 0 |
Bank 1 |
8MB |
(1) 1M x 64 |
None |
16MB |
(1) 2M x 64 |
None |
16MB |
(1) 1M x 64 |
(1) 1M x 64 |
24MB |
(1) 2M x 64 |
(1) 1M x 64 |
32MB |
(1) 4M x 64 |
None |
32MB |
(1) 2M x 64 |
(1) 2M x 64 |
40MB |
(1) 4M x 64 |
(1) 1M x 64 |
48MB |
(1) 4M x 64 |
(1) 2M x 64 |
DIMM CONFIGURATION (CON'T) |
||
Size |
Bank 0 |
Bank 1 |
64MB |
(1) 8M x 64 |
None |
64MB |
(1) 4M x 64 |
(1) 4M x 64 |
72MB |
(1) 8M x 64 |
(1) 1M x 64 |
80MB |
(1) 8M x 64 |
(1) 2M x 64 |
96MB |
(1) 8M x 64 |
(1) 4M x 64 |
128MB |
(1) 16M x 64 |
None |
128MB |
(1) 8M x 64 |
(1) 8M x 64 |
136MB |
(1) 16M x 64 |
(1) 1M x 64 |
144MB |
(1) 16M x 64 |
(1) 2M x 64 |
160MB |
(1) 16M x 64 |
(1) 4M x 64 |
192MB |
(1) 16M x 64 |
(1) 8M x 64 |
256MB |
(1) 16M x 64 |
(1) 16M x 64 |
Note: Board accepts SDRAM memory. |
CACHE CONFIGURATION |
Note: 512KB cache is located on the Pentium II CPU. 128KB cache is located on the Celeron 300A & 333 CPU. |
VIDEO MEMORY CONFIGURATION |
Note: Video memory is factory installed and is not configurable. |
CPU SPEED SELECTION |
|||||
CPU speed |
Clock speed |
Multiplier |
FS0 |
FS1 |
FS2 |
233MHz |
66MHz |
3.5x |
1 & 2 |
1 & 2 |
1 & 2 |
266MHz |
66MHz |
4x |
1 & 2 |
1 & 2 |
1 & 2 |
300MHz |
66MHz |
4.5x |
1 & 2 |
1 & 2 |
1 & 2 |
333MHz |
66MHz |
5x |
1 & 2 |
1 & 2 |
1 & 2 |
Note: Pins designated should be in the closed position. |
CPU SPEED SELECTION (CON'T) |
||||||
CPU speed |
Clock speed |
Multiplier |
BF0 |
BF1 |
BF2 |
BF3 |
233MHz |
66MHz |
3.5x |
1 & 2 |
1 & 2 |
2 & 3 |
2 & 3 |
266MHz |
66MHz |
4x |
2 & 3 |
2 & 3 |
1 & 2 |
2 & 3 |
300MHz |
66MHz |
4.5x |
1 & 2 |
2 & 3 |
1 & 2 |
2 & 3 |
333MHz |
66MHz |
5x |
2 & 3 |
1 & 2 |
1 & 2 |
2 & 3 |
Note: Pins designated should be in the closed position. |