ZENITH DATA SYSTEMS
Z-STATION GT PENTIUM PRO
Device Type |
Mainboard |
Processor |
Pentium Pro |
Processor Speed |
150/166MHz |
Chip Set |
Intel |
Maximum Onboard Memory |
128MB |
Cache |
256KB (located on Pentium Pro CPU) |
BIOS |
AMI |
Dimensions |
305mm x 244mm |
I/O Options |
32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, ATX power connector |
CONNECTIONS |
|||
Purpose |
Location |
Purpose |
Location |
ATX power connector |
ATX |
Parallel port |
CN2 |
VGA feature connector |
C1 |
PS/2 mouse port |
CN3 |
Speaker |
C2 |
Serial port 1 |
CN4 |
Reset switch |
C3 |
IDE interface 2 |
CN5 |
Power LED |
C4 |
IDE interface 1 |
CN6 |
IDE interface LED |
C5 |
Floppy drive interface |
CN7 |
IR connector |
C6 |
CPU fan power |
J17 |
Green PC connector |
C7 |
Card slot fan connector |
J20 |
Soft off power supply |
C8 |
32-bit PCI slots |
PC1 – PC4 |
Serial port 2 |
CN1 |
USER CONFIGURABLE SETTINGS |
|||
Function |
Label |
Position |
|
» |
Factory configured - do not alter |
JP1D |
Pins 2 & 3 closed |
» |
Password normal operation |
JP1E |
Pins 2 & 3 closed |
Password clear |
JP1E |
Pins 1 & 2 closed |
|
» |
CMOS memory normal operation |
JP1F |
Pins 2 & 3 closed |
CMOS memory clear |
JP1F |
Pins 1 & 2 closed |
|
» |
Setup access enabled |
JP1G |
Pins 2 & 3 closed |
Setup access disabled |
JP1G |
Pins 1 & 2 closed |
|
» |
BIOS normal operation |
JP1H |
Pins 2 & 3 closed |
BIOS recovery mode |
JP1H |
Pins 1 & 2 closed |
|
» |
Factory configured - do not alter |
JP1I |
Pins 2 & 3 closed |
SIMM CONFIGURATION |
||
Size |
Bank 0 |
Bank 1 |
8MB |
(2) 1M x 36 |
None |
16MB |
(2) 2M x 36 |
None |
16MB |
(2) 1M x 36 |
(2) 1M x 36 |
24MB |
(2) 2M x 36 |
(2) 1M x 36 |
32MB |
(2) 4M x 36 |
None |
32MB |
(2) 2M x 36 |
(2) 2M x 36 |
40MB |
(2) 4M x 36 |
(2) 1M x 36 |
48MB |
(2) 4M x 36 |
(2) 2M x 36 |
64MB |
(2) 8M x 36 |
None |
64MB |
(2) 4M x 36 |
(2) 4M x 36 |
72MB |
(2) 8M x 36 |
(2) 1M x 36 |
80MB |
(2) 8M x 36 |
(2) 2M x 36 |
96MB |
(2) 8M x 36 |
(2) 4M x 36 |
128MB |
(2) 8M x 36 |
(2) 8M x 36 |
CACHE CONFIGURATION |
Note: 256KB cache is located on the Pentium Pro CPU. |
CPU SPEED SELECTION |
|||||
CPU speed |
Clock speed |
Multiplier |
JP1A |
JP1B |
JP1C |
150MHz |
60MHz |
2.5x |
1 & 2 |
1 & 2 |
1 & 2 |
166MHz |
66MHz |
2.5x |
2 & 3 |
2 & 3 |
1 & 2 |
Note: Pins designated should be in the closed position. |