B & B ELECTRONICS
PCIRWDT, PCIXWDT
|
Card Type |
Watchdog timer card |
|
Chip Set |
None |
|
Maximum Onboard Memory |
Unidentified |
|
I/O Options |
Serial port |
|
Hard Drives supported |
None |
|
Floppy drives supported |
None |
|
Data Bus |
32-bit PCI |
|
Card Size |
Full-length, half height |
|
CONNECTIONS |
|||
|
Function |
Label |
Function |
Label |
|
9-pin serial port |
J2 |
Timer reset connector |
JP1 |
|
Motherboard reset connector |
J3 |
ATX power supply connector |
JP2 |
|
Reset button connector |
J4 |
||
|
MISCELLANEOUS TECHNICAL NOTES |
|
To enable the PCIR version of the watchdog timer card to reboot the main board, they must be connected. The mother board reset connector on the watchdog timer card can be connected to the reset pins on the main board or the reset button connector of the watchdog timer card can be connected to the jumper wires of the main board’s reset switch. |