AMPRO COMPUTERS, INC.

EMBEDDED SOUND MODULE

Card Type

Sound card

Chip Set

ESS Technology, Inc.

I/O Options

CD audio in, stereo line in/out, microphone in, PC speaker in/out

Card Size

Half-length, full-height card

CONNECTIONS

Function

Label

Function

Label

Speaker connector

J3

CD audio input connector

J7

Common I/O connector

J4

PC speaker connector

J8

Stereo output jack

J5

Header connection to expansion board

P1

Stereo input jack

J6

   


PC SPEAKER CONTROL

Setting

J10

PC speaker output is analog version of speaker input

Pins 1 & 2 closed

PC speaker output is tied to left speaker amplifier output

Pins 1 & 7 closed

Speaker volume controlled by software and external potentiameter

Pins 3 & 4, 8 & 9 closed

Speaker volume controlled only by software

Pins 4 & 5, 9 & 10 closed


STEREO OUTPUT CONTROL

Setting

J11

Stereo output jack J5 set to amplified left/right

Pins 1 & 3, 2 & 4 closed

Stereo output jack J5 set to line out

Pins 3 & 5, 4 & 6 closed

Stereo input jack J6 set to line in

Pins 7 & 9, 8 & 10 closed

Stereo input jack J6 set to mic in on left channel; right channel unused

Pins 10 & 12 closed

Stereo input jack J6 set to mic in on right channel; left channel unused

Pins 11 & 12 closed


DMA CHANNEL/INTERRUPT SELECTION

DMA Channel

IRQ Setting

J9

Disable

2/9

Pins 6 & 7, 14 & 15 closed

0/Disable

7

Pins 7 & 8, 14 & 15 closed

1

5

Pins 6 & 7, 15 & 16 closed

3

3/10

Pins 7 & 8, 15 & 16 closed

Note: Setting for DMA 0 is for 16-bit version of this board. Setting for DMA 0 on an 8-bit board diables the DMA. IRQ9 and IRQ10 are available only on 16-bit boards. IRQ2 and IRQ3 are selected on 8-bit boards.


BASE I/O ADDRESS SELECTION

Setting

J9/1 & 2

J9/9 & 10

220h

Open

Closed

240h

Closed

Open