OCEAN INFORMATION SYSTEMS, INC.
PIO-001
|
Card Type |
Hard drive controller |
|
Chip Set |
Unidentified |
|
Hard Drives supported |
Two IDE(AT) drives |
|
Floppy drives supported |
Two 360KB, 720KB, 1.2MB, or 1.44MB |
|
I/O Options |
Floppy drive interface, IDE interface, parallel port, serial ports (2), game port |
|
Data Bus |
16-bit ISA |
|
CONNECTIONS |
|||
|
Function |
Label |
Function |
Label |
|
25-pin parallel port |
J1 |
34-pin cable connector - floppy drive |
P4 |
|
Game port |
P1 |
10-pin serial port 1 - internal |
P5 |
|
2-pin connector - drive active LED |
P2 |
10-pin serial port 2 - internal |
P6 |
|
40-pin IDE(AT) connector |
P3 |
||
|
USER CONFIGURABLE SETTINGS |
|||
|
Function |
Label |
Position |
|
|
Serial port 1 enabled |
JP2 |
Pins 1 & 2 closed |
|
|
Serial port 1 disabled |
JP2 |
Pins 2 & 3 closed |
|
| » |
Factory configured - do not alter |
JP3 |
Unidentified |
|
Parallel port enabled |
JP4 |
Pins 1 & 2 closed |
|
|
Parallel port disabled |
JP4 |
Pins 2 & 3 closed |
|
|
Serial port 2 enabled |
JP7 |
Pins 1 & 2 closed |
|
|
Serial port 2 disabled |
JP7 |
Pins 2 & 3 closed |
|
|
Low speed IDE |
JP8 |
Pins 1 & 2 closed |
|
|
High speed IDE |
JP8 |
Pins 2 & 3 closed |
|
|
IDE(AT) interface enabled |
JP9 |
Pins 1 & 2 closed |
|
|
IDE(AT) interface disabled |
JP9 |
Pins 2 & 3 closed |
|
|
Game port enabled |
JP11 |
Pins 1 & 2 closed |
|
|
Game port disabled |
JP11 |
Pins 2 & 3 closed |
|
|
Floppy drive interface enabled |
JP12 |
Pins 1 & 2 closed |
|
|
Floppy drive interface enabled |
JP12 |
Pins 2 & 3 closed |
|
|
SERIAL PORT 1 ADDRESS SELECTION |
|
|
Setting |
JP5 |
|
COM1 (3F8h) |
Pins 1 & 2 closed |
|
COM3 (3E8h) |
Pins 2 & 3 closed |
|
SERIAL PORT 2 ADDRESS SELECTION |
|
|
Setting |
JP6 |
|
COM2 (2F8h) |
Pins 1 & 2 closed |
|
COM4 (2E8h) |
Pins 2 & 3 closed |
|
PARALLEL PORT ADDRESS SELECTION |
|
|
Setting |
JP10 |
|
LPT2 (378h) |
Pins 1 & 2 closed |
|
LPT3 (278h) |
Pins 2 & 3 closed |